Step 2Component list

Here is what you need to make a LED cube:

• 512x  LEDs (plus some extra for making mistakes!)
• 64x resistors. (see separate step for ohm value)
• 1x or 2x large prototype PCBs. The type with copper "eyes", see image.
• 1x ATmega32 microcontroller (you can also use the pin-compatible ATmega16)
• 3x status LEDs. You choose color and size.
• 3x resistors for the status LEDs.
• 8x 74HC574 ICs
• 16x PN2222 transistors
• 16x 1k resistors
• 1x 74HC138 IC
• 1x Maxim MAX232 IC
• 1x 14.7456 MHz crustal
• 2x 22pF ceramic capacitors
• 16x 0.1uF ceramic capacitors
• 3x 1000uF electrolytic capacitor
• 3x 10uF electrolytic capacitor
• 1x 100uF electrolytic capacitors
• 8x 20 pin IC sockets
• 1x 40 pin IC socket
• 2x 16 pin IC socket
• 1x 2-pin screw terminal
• 1x 2wire cable with plugs
• 9x 8-pin terminal pins
• 1x 4-pin terminal pins, right angle
• 2x 16-pin ribbon cable connector
• 1x 10-pin ribbon cable connector
• Ribbon cable
• 2x pushbuttons
• 2x ribbon cable plugs
• 9x 8-pin female header plugs
• Serial cable and 4pin female pin header
• Piece of wood for template and base
• 8x optional pull-up resistors for layers
• 5v power supply (see separate step for power supply)

（先转载到此，困了先睡觉，明天继续。。。）