无线自行车里程计（二）
0赞
发表于 5/19/2011 12:50:35 AM
阅读（1844）
Step 1Tools & Components
Here's a list of what you're going to need for this project:
Components:
Components:
- (2x) ALTOIDS Tins
- Arduino ATMega 328
- 16x2 LCD HD44780
- A form of sheet insulation (Card / Foam etc.)
- 5mm Clear PVC Tubing
- (2x) Xbee Pro Modules (U.FL antenna connector)
- (2x) U.FL to RP-SMA pigtails
- (2x) Adafruit Industries Xbee Adapter Kit
- (2x) RP-SMA 2.4Ghz Duck Antenna
- USB type A to type B
- USB to Serial FTDI
- Cat5 Cable
- 1k Resistor
- Soldering Iron & Solder
- Needle-nose Pliers
- Scissors
- Marker Pen
- Wire Strippers
- Fine Grade Sandpaper
- Power Drill (5mm bit) / Bodkin Skewer
