LE发光音乐盒（六）
0赞
发表于 6/4/2011 9:28:31 PM
阅读（1341）
Step 6Power
We need power so the whole thing works.
Again, it depends on the controllers you have, but at least all the LED controllers should share the same voltage.
Connect all the power cables into one adapter to get rid of too much cabling. It is best to solder this and put a shrink tube over it.
Make sure you use long cables as you need it at a length to neatly get it out of the device and to the socket. 1 meter to begin with should be fine. But you can use more if you think you will need it.
See images below to get a better idea.
Again, it depends on the controllers you have, but at least all the LED controllers should share the same voltage.
Connect all the power cables into one adapter to get rid of too much cabling. It is best to solder this and put a shrink tube over it.
Make sure you use long cables as you need it at a length to neatly get it out of the device and to the socket. 1 meter to begin with should be fine. But you can use more if you think you will need it.
See images below to get a better idea.
