Step 10Cover on

Now it's the cover's turn. Once you have made sure everything is stuck down, secure, working and nice looking, get the cover.

Clean it from the inside to get rid of smudges.

Drill 4 holes in the 4 cubes at each corner. Make sure there is something underneath so the drill bit doesn't scratch the top of the acrylic glass cover.

Drill holes in the same locations on the wooden board.

put a screw through each on of the holes in the acrylic glass cover cubes. secure them at the top using glue if they still turn.

Put the screws through the holes in the board. Everything should align perfectly, the holes for the wires included.

Once the screws are through, secure them with nuts on the other side of the board.