Step 2Construction of the GLOBE

Make 3 Big Rings out of the Mild steel wire of the same size and 2 small rings of same size.

Tie up the 2 Vertical rings with the Horizontal ring with thin wires as shown in the illustration. Take care to see that there is no electrical connection between the Vertical and Horizontal Rings.

Wrap cello tape around the Horizontal rings to make it a bad conductor to Electricity.

Now tie up the 2 small rings, one at the top and the other at the bottom of the GLOBE.

Take care so that there is no electrical contact between the Big rings and the Small Rings.

Step 3Circuit for the LED's

Circuit for the LED’s.

Here we will be using two types of LED circuit for this project.

8 Double Row and 8 Single Row of LED’s.

5 LED’s have been used in one ROW because……………

12v x 1.4 = 16.8

16.8 divided by 3.5v = 4.8 or say 5 LED’s. in one row.

12 volt AC has been provided to 5 plus and 5 minus LED’s. In the Double Row LED’s.

The same 12 volt is connected to the single rows, See Diagram.