SAE的精神食粮

发表于 11/9/2010 9:38:04 AM 阅读（4458）

有时候常常惶恐，觉得设计的时候缺乏资源；又或者遇到设计的瓶颈，需要找一些借鉴的时候，可以看一下这个文档《What do SAE standards offer the Automotive Electronics industry》

以上的这个文档，详细的把SAE的规范和部分文档罗列了出来，还有其他的杂志文章不在其列，相对而言SAE的文章质量是比较高的，比IEEE的好很多。

Accessories

J1239 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers

J563 Standards for 12 Volt Cigarette Lighters, Power Outlets, and Accessory Plugs

Architecture
J2356 A Graphical Model for Interactive Distributed Control
J2186 E/E Data Link Security
J2546 Model Specification Process Standard
J2056/3 Selection of Transmission Media
J2524 Vehicle Network Protocol Survey

J2748 VHDL-AMS Statistical Analysis Packages

Cables

J2183 60 V and 600 V Single Core Cables
J2863 Automotive Trailer Tow Connector
J156 Fusible Links
J163 Low Tension Wiring and Cable Terminals and Splice Clips
J1127 Low Voltage Battery Cable
J1128 Low Voltage Primary Cable
J1678 Low Voltage Ultra Thin Wall Primary Cable
J2031 High Tension Ignition Cable
J1654 High Voltage Primary Cable
J2840 High Voltage Shielded Primary Cable
J2032 Ignition Cable Assemblies
J2501 Round, Screened and Unscreened, 60 V and 600 V Multicore Sheathed Cables Definitions/Terms/Naming Conventions
J831 Electrical Definitions
J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations,and Acronyms–Equivalent to ISO/TR 15031-2
J1416 Generator Terminal Labeling
J1213/1 Glossary of Vehicle Networks for Multiplexing and Data Communications
J139 Ignition System Nomenclature and Terminology

Electrical Systems
Battery
J1494 Battery Booster Cables
J2801 Comprehensive Life Test for 12V Automotive Storage Batteries
J2289 Electric Drive Battery Pack System: Functional Guidelines
J2464 Electric Vehicle Battery Abuse Testing
J2288 Life Cycle Testing of Electric Vehicle Battery Modules
J240 Life Test for Automotive Storage Batteries
J2185 Life Test for Heavy-Duty Storage Batteries
J1127 Low Voltage Battery Cable
J1797 Recommended Practice for Packaging of Electric Vehicle Battery Modules
J1798 Recommended Practice for Performance Rating of Electric Vehicle Battery Modules
J537 Storage Batteries
J1495 Test Procedure for Battery Flame Retardant Venting Systems
J2380 Vibration Testing of Electric Vehicle Batteries
Fuses
J2576 Blade Fuses – 42 V System
J1284 Blade Type Electric Fuses
J2736 Blade Type Electric Fuses
J554 Electric Fuses (Cartridge Type)
J2741 Fuses with Female Contacts – 32V System
J2778 Fuses With Bolt down Contacts – 32V Systems
J2781 Fuses with Bolt-In Contacts with Rated Voltage of 450V
J1888 High Current Time Lag Electric Fuses
J2077 Miniature Blade Type Electrical Fuses
J2294 Recommended Practices for Test and Performance of Auxiliary Fuses
for High Voltage Road Vehicle Wiring Systems
Voltage
J541 Voltage Drop for Starting Motor Circuits
J539 Voltages for Diesel Electrical Systems
J2669 Voltage Regulators for Automotive-Type Generators
J2232 Vehicle System Voltage Initial Recommendations 42 Volt
J2622 Battery Connections for 42 Volt Electrical Systems Tests and General Performance Requirements

J2576 Blade Fuses -

42 V System

J2651 Jump Start Connections for 42 Volt Electrical Systems

Electrical Terminals

J858 Electrical Terminals Blade Type
J561 Electrical Terminals–Eyelet and Spade Type

J928 Electrical Terminals–Pin and Receptacle Type

Embedded Software

J2632 Embedded Software C Coding Practices
J2516 Embedded Software Development Lifecycle
J2734 Embedded Software Verification and Validation
J2640 General Automotive Embedded Software Design Requirements
J2602/3 LDF/NCF Data Definition and Format Recommended Practice
J2780 Model Based Embedded Systems Engineering
J2746 Software Assessment Repository
J2720 Software Development for Calibration and Manufacturing
EMC
J1113/1 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (Up to 15 M), and Machines (Except Aircraft) (16.6 Hz to 18 GHz)
J1113/2 Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft) – Conducted Immunity, 15 Hz to
250 kHz – All Leads J1113/3 Conducted Immunity, 250 KHz to 400 MHz, Direct Injection of Radio Frequency (Rf) Power
J1113/4 Immunity to Radiated Electromagnetic Fields-Bulk Current Injection (BCI) Method
J1113/11 Immunity to Conducted Transients on Power Leads
J1113/12 Electrical Interference by Conduction and Coupling – Capacitive and Inductive Coupling via Lines Other than Supply Lines
J1113/13 Electromagnetic Compatibility Measurement Procedure for Vehicle Components –Part 13: Immunity to Electrostatic Discharge
J1113/21 Electromagnetic Compatibility Measurement Procedure for Vehicle Components –Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined
Chamber
J1113/22 Electromagnetic Compatibility Measurement Procedure for Vehicle Components –Part 22: Immunity to Radiated Magnetic Fields
J1113/24 Immunity to Radiated Electromagnetic Fields; 10 KHz to 200 MHz – Crawford Tem Cell and 10 KHz to 5 GHz–Wideband Tem Cell
J1113/26 Electromagnetic Compatibility Measurement Procedure for Vehicle Components –Immunity to AC Power Line Electric Fields
J1113/27 Electromagnetic Compatibility Measurements Procedure for Vehicle Components– Part 27: Immunity to Radiated Electromagnetic Fields – Mode Stir Reverberation
Method
J1113/28 Electromagnetic Compatibility Measurements Procedure for Vehicle Components– Part 28: Immunity to Radiated Electromagnetic Fields–Reverberation Method
(Mode Tuning)
J1113/42 Electromagnetic Compatibility – Component Test Procedure – Part 42: Conducted Transient Emissions
J551/1 Performance Levels and Methods of Measurements of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz)
J551/5 Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9 kHz to 30 MHz
J551/11 Vehicle Electromagnetic Immunity – Off Vehicle Source
J551/12 Vehicle Electromagnetic Immunity – On Board Transmitter Simulation
J551/13 Vehicle Electromagnetic Immunity – Bulk Current Injection
J551/15 Vehicle Electromagnetic Immunity – Electrostatic Discharge (ESD)
J551/16 Electromagnetic Immunity – Off-Vehicle Source (Reverberation Chamber Method) – Part 16: Immunity to Radiated Electromagnetic Fields
J551/17 Vehicle Electromagnetic Immunity – Power line Magnetic Fields
J1752/1 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits – Integrated Circuit EMC Measurement Procedures – General and Definitions
J1752/2 Measurement of Radiated Emissions from Integrated Circuits – Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
J1752/3 Measurement of Radiated Emissions from Integrated Circuits – TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)
J1812 Function Performance Status Classification for EMC Immunity Testing
J2556 Radiated Emissions (RE) Narrowband Data Analysis – Power Spectral Density (PSD)

J2628 Characterization – Conducted Immunity

Environmental

J2456 Mercury Switch Removal Process

Electric Vehicle, PHEV, HEV
J2293/1 Energy Transfer System for Electric Vehicles – Part 1: Functional Requirements and System Architectures
J2293/2 Energy Transfer System for Electric Vehicles – Part 2: Communication Requirements and Network Architecture
J2841 Definition of the Utility Factor for Plug-in Hybrid Electric Vehicles Using NHTS Data
J2758 Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle
J1772 SAE Electric Vehicle Conductive Charge Coupler

J1773 SAE Electric Vehicle Inductively Coupled Charging

Battery

J2289 Electric-Drive Battery Pack System Functional Guidelines
J2464 Electric Vehicle Battery Abuse Testing
J2288 Life Cycle Testing of Electric Vehicle Battery Modules
J1797 Recommended Practice for Packaging of Electric Vehicle Battery Modules
J1798 Recommended Practice for Performance Rating of Electric Vehicle Battery Modules

J2380 Vibration Testing of Electric Vehicle Batteries

Emissions

J1711 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles

Plug-in Vehicles

J2847/1 Communication between Plug-in Vehicles and the Utility Grid

J2847/2 Communication between Plug-in Vehicles and the Supply

Safety

J2344 Guidelines for Electric Vehicle Safety Equipment (EVSE)

J2847/3 Communication between Plug-in Vehicles and the Utility Grid for Reverse Power Flow

一直困扰大多数工程师的可靠性的问题，也可以仔细看看以下的部分：

J1850 Class B Data Communications Network Interface
J1938 Design/Process Checklist for Vehicle Electronic Systems
J2837 Environmental Conditions and Design Practices for Automotive Electrical/Electronic Equipment: Reference Data from J1211 Nov 1978（修订中）
J1213/2 Glossary of Reliability Terminology Associated With Automotive Electronics
J1211 Handbook for Robustness Validation of Automotive Electrical/Electronic Modules
J1879 Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications
J2820 Modeling and Simulation Methods for Automotive Electrical/Electronic Components and Systems（修订中）
J1699/1 SAE J1850 Verification Test Procedures
J2450/1 SAE J2450 Supplemental Training Document
J2128 The Reliability Disciplines（修订中）